As shown in the figure below, the names of the exterior parts of the car. 2: As shown in the figure below, the name of the internal structure of the car.
Vehicle exterior parts diagram Basically, the exterior parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
The car bumper is composed of three parts: outer plate, buffer material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact. As shown in the figure: The car leaf plate, also known as the wing plate, is located outside the body of the wheel, which can be said to be a covering part, which is conducive to the stability of the car.
Everyone must know that the steering wheel controls the direction of the car. The clutch pedal should be stepped on before hanging and removing the gear, which has the effect of making the car start smoothly and protecting the gears.Brake Brake is also called brake. Step on the brake pedal to achieve rapid braking of the car.
1. In radiator and engine gas The circulation channel in the cylinder is used to cool the liquid medium of the engine, mainly water and additives.Because of its antifreeze function, it is called antifreeze. Glass kettle: Everyone knows that it is used to clean glass. Now you should tell me where it is. Oil scale: oil volume detector.
2. The structure diagram of the automobile engine is as follows: the engine is composed of two major mechanisms: crank connecting rod mechanism and gas distribution mechanism, as well as five major systems such as cooling, lubrication, ignition, fuel supply and start-up system. The main components include cylinder block, cylinder head, piston, piston pin, connecting rod, crankshaft, flywheel, etc.
3. The fusele group is mainly composed of cylinder block, cylinder liner, cylinder head, cylinder pad and other parts. Cylinder block The cylinder block is made of gray cast iron. The cylindrical cavity in the upper part of the cylinder is called the cylinder. The lower half is the crankcase supporting the crankshaft, and its lumen is the space for the movement of the crankshaft.
4. Cylinder block.The cylinder block is the body of the cylinder. The crankcase is divided into upper and lower parts. The upper crankcase is used to support the crankshaft. The cylinder block and the upper crankcase of the water-cooled engine are cast into one, referred to as the cylinder block, as shown in Figure 3-8. It is the most complex part and the most massive part in the engine.
5. The engine of a car is composed of two major mechanisms and five major systems, namely the crank connecting rod mechanism, the gas distribution mechanism and the cooling system, the lubrication system, the fuel system, the start system and the ignition system. Each system is composed of relevant parts. The following is the parts recognition diagram of the engine.
Automobile engine: The engine is the power device of the automobile.It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
Engine lubrication system structure diagram Engine gas distribution mechanism connecting rod mechanism structure diagram engine body structure diagram engine cooling system structure diagram This is the structure diagram of the automobile engine. If you can't appreciate it yet, please take a look at the next most comprehensive internal structure diagram of the automobile system in history.
Auto parts name and engine structure diagram. Engine: The engine is the power unit of the car, which is composed of two major institutions and five major departments. Crank connecting rod mechanism: composed of fusele, piston connecting rod group, crankshaft flywheel group, etc.
1. The specific illustration is as follows: The car bumper is composed of three parts: outer plate, cushion material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact.
2. As shown in the figure below, the name of the exterior part of the car. 2: As shown in the figure below, the name of the internal structure of the car.
3. Basically, the appearance parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
4. Car engine: The engine is the power device of the car. It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
5. Car leaf plate The car leaf plate, also known as the wing plate, is located outside the body of the wheel and can be said to be a covering part. It can not only reduce the wind resistance coefficient when driving according to aerodynamics, but also greatly help the stability of the car.
Binance app-APP, download it now, new users will receive a novice gift pack.
As shown in the figure below, the names of the exterior parts of the car. 2: As shown in the figure below, the name of the internal structure of the car.
Vehicle exterior parts diagram Basically, the exterior parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
The car bumper is composed of three parts: outer plate, buffer material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact. As shown in the figure: The car leaf plate, also known as the wing plate, is located outside the body of the wheel, which can be said to be a covering part, which is conducive to the stability of the car.
Everyone must know that the steering wheel controls the direction of the car. The clutch pedal should be stepped on before hanging and removing the gear, which has the effect of making the car start smoothly and protecting the gears.Brake Brake is also called brake. Step on the brake pedal to achieve rapid braking of the car.
1. In radiator and engine gas The circulation channel in the cylinder is used to cool the liquid medium of the engine, mainly water and additives.Because of its antifreeze function, it is called antifreeze. Glass kettle: Everyone knows that it is used to clean glass. Now you should tell me where it is. Oil scale: oil volume detector.
2. The structure diagram of the automobile engine is as follows: the engine is composed of two major mechanisms: crank connecting rod mechanism and gas distribution mechanism, as well as five major systems such as cooling, lubrication, ignition, fuel supply and start-up system. The main components include cylinder block, cylinder head, piston, piston pin, connecting rod, crankshaft, flywheel, etc.
3. The fusele group is mainly composed of cylinder block, cylinder liner, cylinder head, cylinder pad and other parts. Cylinder block The cylinder block is made of gray cast iron. The cylindrical cavity in the upper part of the cylinder is called the cylinder. The lower half is the crankcase supporting the crankshaft, and its lumen is the space for the movement of the crankshaft.
4. Cylinder block.The cylinder block is the body of the cylinder. The crankcase is divided into upper and lower parts. The upper crankcase is used to support the crankshaft. The cylinder block and the upper crankcase of the water-cooled engine are cast into one, referred to as the cylinder block, as shown in Figure 3-8. It is the most complex part and the most massive part in the engine.
5. The engine of a car is composed of two major mechanisms and five major systems, namely the crank connecting rod mechanism, the gas distribution mechanism and the cooling system, the lubrication system, the fuel system, the start system and the ignition system. Each system is composed of relevant parts. The following is the parts recognition diagram of the engine.
Automobile engine: The engine is the power device of the automobile.It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
Engine lubrication system structure diagram Engine gas distribution mechanism connecting rod mechanism structure diagram engine body structure diagram engine cooling system structure diagram This is the structure diagram of the automobile engine. If you can't appreciate it yet, please take a look at the next most comprehensive internal structure diagram of the automobile system in history.
Auto parts name and engine structure diagram. Engine: The engine is the power unit of the car, which is composed of two major institutions and five major departments. Crank connecting rod mechanism: composed of fusele, piston connecting rod group, crankshaft flywheel group, etc.
1. The specific illustration is as follows: The car bumper is composed of three parts: outer plate, cushion material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact.
2. As shown in the figure below, the name of the exterior part of the car. 2: As shown in the figure below, the name of the internal structure of the car.
3. Basically, the appearance parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
4. Car engine: The engine is the power device of the car. It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
5. Car leaf plate The car leaf plate, also known as the wing plate, is located outside the body of the wheel and can be said to be a covering part. It can not only reduce the wind resistance coefficient when driving according to aerodynamics, but also greatly help the stability of the car.
724.78MB
Check927.25MB
Check525.51MB
Check358.17MB
Check941.58MB
Check341.55MB
Check325.37MB
Check399.94MB
Check577.57MB
Check835.47MB
Check823.31MB
Check294.89MB
Check543.61MB
Check182.38MB
Check148.92MB
Check694.75MB
Check479.39MB
Check777.27MB
Check146.43MB
Check417.57MB
Check443.83MB
Check212.38MB
Check254.11MB
Check781.26MB
Check474.96MB
Check611.73MB
Check776.46MB
Check617.14MB
Check575.58MB
Check692.88MB
Check497.65MB
Check684.35MB
Check991.53MB
Check396.17MB
Check623.21MB
Check931.23MB
CheckScan to install
Binance app to discover more
Netizen comments More
164 渔夺侵牟网
2025-01-23 09:14 recommend
949 拔犀擢象网
2025-01-23 08:46 recommend
2985 精兵强将网
2025-01-23 08:15 recommend
1878 一弹指顷网
2025-01-23 07:20 recommend
1802 药店飞龙网
2025-01-23 06:36 recommend