1. The last way is to reinstall the system directly. When reinstalling, you should choose to format the system disk, or use other restore software such as ghost to restore the system directly.
2. Press the ESC key when the progress bar appears in the one-click restore wizard, and then enter the advanced settings in the menu bar, transfer to DOS, and manually GHOST to restore the WIN.GHO file in the IBM_SERVICE hidden partition.If there is still a problem, it may be that the hard disk has a bad channel. OR YOU CAN ALSO START THE COMPUTER WITH A BOOT DISK WITH GHOST TO RESTORE IT.
3. It depends on the situation. The cost of reinstalling may be huge. Maybe everything on the original hard disk will be finished. If you know DOS and check that the volume label of the C disk (using the dir command) is IBM_SERVICE, you can use IBM's one-click restore installer to repair it, just hold it once.
Driver sprite is very practical for users who do not have a drive disk at hand. Users can In order to extract and back up the drivers in the system through this software to achieve the effect of "cloning".
Let's take a look at the specific steps. Let's take a look at how the editor does it do~ What is the use of installing and downloading the driver sprite on the computer? Driver Genie is a free software for driver management, intelligent detection of hardware and automatic search for installation drivers. It will intelligently check from the Internet according to the system you are using and the hardware on your computer. Find the hardware driver you need.
, pointClick the "Treasure Chest" tab above to see all the functions of the driver elf, including system tools and system optimization, which is a very good practical toolbox.
1. First, try to download the new driver. Please refer to how to find the hardware driver for instructions on finding the driver. If the driver cannot be installed, please try to install it in compatibility mode: 1) If the driver has been installed, uninstall it.
2. It may be a sound card driver problem. Don't worry. Next, I will share with you the reason and solution for the no sound of the headphones inserted in front of the win8 computer chassis.
3. This is related to the driver. Please check whether the driver is not fully installed;If there is no problem with the driver, please check the settings of the Bluetooth device.
4. Driver problem: It may be that the driver of your USB audio device is not properly installed or updated, causing the system to be unable to recognize or use the device. You can try to uninstall and reinstall the driver of the device, or download the latest driver from the Windows update or the official website of the device to see if there is any improvement 123.
5. Next, the editor will introduce to you the solution to the problem that there is no sound when plugging in the headphones in the win1 system.
Windows10 system computer prompt: "Your computer has a problem and needs to be restarted. We only collect some error messages and need to be restarted" The specific situation and corresponding solutions are as follows: Situation 1: The system conflicts with third-party antivirus software.
Default mode 1: Open the main program, insert mobile devices such as USB flash drive/SD card, and the disk symbols, models, capacity and other information of all removable disks in the current computer will be automatically listed in the disk list.
There is a virus in the computer (open Tencent Computer Butler, one anti-virus, one scan and kill). If you kill a Trojan horse or virus, you should restart immediately. After restarting the computer, go to "Isolation | Recovery" and completely delete the Trojan horse and virus! 2.
Keep clicking F8 when bootingKey, enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.
Use CD-ROM to reinstall the system. The operation steps are as follows: (1) Prepare the system CD-ROM: If not, you can go to the computer store to buy it, and buy the latest version of the CD-ROM of any system you need to install. If you have a burning optical drive, you can also download the ISO format system file on the Internet and burn it to the system CD.
Your situation may be that there are bad clusters, viruses, disk controller errors, and memory problems in the virtual memory page file. Check whether the hard disk and memory are damaged. If there is no problem with the hardware, you can try to reinstall the system on the USB flash drive.
Binance download Android-APP, download it now, new users will receive a novice gift pack.
1. The last way is to reinstall the system directly. When reinstalling, you should choose to format the system disk, or use other restore software such as ghost to restore the system directly.
2. Press the ESC key when the progress bar appears in the one-click restore wizard, and then enter the advanced settings in the menu bar, transfer to DOS, and manually GHOST to restore the WIN.GHO file in the IBM_SERVICE hidden partition.If there is still a problem, it may be that the hard disk has a bad channel. OR YOU CAN ALSO START THE COMPUTER WITH A BOOT DISK WITH GHOST TO RESTORE IT.
3. It depends on the situation. The cost of reinstalling may be huge. Maybe everything on the original hard disk will be finished. If you know DOS and check that the volume label of the C disk (using the dir command) is IBM_SERVICE, you can use IBM's one-click restore installer to repair it, just hold it once.
Driver sprite is very practical for users who do not have a drive disk at hand. Users can In order to extract and back up the drivers in the system through this software to achieve the effect of "cloning".
Let's take a look at the specific steps. Let's take a look at how the editor does it do~ What is the use of installing and downloading the driver sprite on the computer? Driver Genie is a free software for driver management, intelligent detection of hardware and automatic search for installation drivers. It will intelligently check from the Internet according to the system you are using and the hardware on your computer. Find the hardware driver you need.
, pointClick the "Treasure Chest" tab above to see all the functions of the driver elf, including system tools and system optimization, which is a very good practical toolbox.
1. First, try to download the new driver. Please refer to how to find the hardware driver for instructions on finding the driver. If the driver cannot be installed, please try to install it in compatibility mode: 1) If the driver has been installed, uninstall it.
2. It may be a sound card driver problem. Don't worry. Next, I will share with you the reason and solution for the no sound of the headphones inserted in front of the win8 computer chassis.
3. This is related to the driver. Please check whether the driver is not fully installed;If there is no problem with the driver, please check the settings of the Bluetooth device.
4. Driver problem: It may be that the driver of your USB audio device is not properly installed or updated, causing the system to be unable to recognize or use the device. You can try to uninstall and reinstall the driver of the device, or download the latest driver from the Windows update or the official website of the device to see if there is any improvement 123.
5. Next, the editor will introduce to you the solution to the problem that there is no sound when plugging in the headphones in the win1 system.
Windows10 system computer prompt: "Your computer has a problem and needs to be restarted. We only collect some error messages and need to be restarted" The specific situation and corresponding solutions are as follows: Situation 1: The system conflicts with third-party antivirus software.
Default mode 1: Open the main program, insert mobile devices such as USB flash drive/SD card, and the disk symbols, models, capacity and other information of all removable disks in the current computer will be automatically listed in the disk list.
There is a virus in the computer (open Tencent Computer Butler, one anti-virus, one scan and kill). If you kill a Trojan horse or virus, you should restart immediately. After restarting the computer, go to "Isolation | Recovery" and completely delete the Trojan horse and virus! 2.
Keep clicking F8 when bootingKey, enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.
Use CD-ROM to reinstall the system. The operation steps are as follows: (1) Prepare the system CD-ROM: If not, you can go to the computer store to buy it, and buy the latest version of the CD-ROM of any system you need to install. If you have a burning optical drive, you can also download the ISO format system file on the Internet and burn it to the system CD.
Your situation may be that there are bad clusters, viruses, disk controller errors, and memory problems in the virtual memory page file. Check whether the hard disk and memory are damaged. If there is no problem with the hardware, you can try to reinstall the system on the USB flash drive.
432.52MB
Check841.33MB
Check851.93MB
Check162.57MB
Check724.35MB
Check386.99MB
Check263.51MB
Check365.99MB
Check797.36MB
Check158.17MB
Check783.86MB
Check588.74MB
Check487.78MB
Check555.23MB
Check335.15MB
Check157.51MB
Check384.12MB
Check212.91MB
Check479.83MB
Check536.29MB
Check472.48MB
Check287.97MB
Check127.21MB
Check823.59MB
Check142.93MB
Check574.32MB
Check236.93MB
Check474.69MB
Check586.23MB
Check621.17MB
Check248.83MB
Check639.69MB
Check222.74MB
Check111.67MB
Check489.96MB
Check362.59MB
CheckScan to install
Binance download Android to discover more
Netizen comments More
1136 含笑九泉网
2025-01-23 00:45 recommend
1365 蹑足其间网
2025-01-23 00:01 recommend
126 螓首蛾眉网
2025-01-22 23:53 recommend
504 层出不穷网
2025-01-22 23:12 recommend
1799 沟满壕平网
2025-01-22 22:16 recommend